- Can handle power surges up to 9000 watts and even run on car batteries.
- Fully computerized with hi-speed dual and microprocessors.
- Multiple internal layers of heavy copper traces for greater current capacity.
- Short circuit detection and voltage spike suppression circuits to protect the controller.
- Smart thermal management reduces heat buildup during sustained firing on certain settings.
Smartphone Bluetooth Interface
- Quickest and most versatile method of programming AEGs. No complex trigger inputs or opening the AEG.
- Program your AEG mid-skirmish in seconds without any tools or manual, just your smartphone only.
- User-programmable passcode and a shortened signal range prevents any unauthorized setting changes.
- No need to "pre-connect" to the Spectre in the smartphone's settings. Is accessed instantly from within the app.
- Fully certified by the FCC (USA), IC (Canada), CE (Europe), and 日本電波法 (Japan).
Essential App for Techs
- Smartphone app reports battery voltage, current draw, and FET temperature. Basically a "wireless multimeter".
- Reports timing of shot cycles and RoF, which helps fine-tuning the AEG to achieve the best possible cycle rate.
- Diagnostic functions that display which microswitches are pressed in real-time and also what error has occurred.
- Records total number of shots fired since the battery was connected and also for each trigger pull.
MOSFET Trigger
- Eliminates damaging electrical arcing of the trigger switch contacts.
- Lower resistance compared to mechanical switching, increasing motor current.
- Driven by a , the world's most powerful D2PAK-style MOSFET.
Dynamic Braking
- Eliminates the motor spin-down time to prevent the piston from over-traveling.
- Assists in keeping the piston properly reset to reduce stress on the gearbox.
- Prevents double firing on semi-fire in extremely high RoF setups.
- Also driven by the powerful MOSFET.
Cycle Completion
- Gearbox always completes the last cycle regardless of when the trigger is released.
- Assists in keeping the piston properly reset to reduce stress on the gearbox.
- The motor will always have the smoothest and most consistent startup.
- Allows the anti-reversal latch to be removed.
Configurable Triple Fire Select
- All three fire select positions can be individually configured, for a total of 729 (9x9x9) possible configs.
- Available options for each selector position:
- Safe
- Semi fire
- Auto fire
- Burst [non-interruptible]
- Burst [interruptible]
- Burst/Auto hybrid [burst non-interruptible]
- Burst/Auto hybrid [burst interruptible]
- Semi/Auto hybrid
- Semi/Auto ramping
- Non-interrupt burst completes a burst even if the trigger is released, whereas interruptable stops mid-burst.
- Burst modes can be programmed to fire 2 - 10 shots per burst. Each selector can have different burst amounts.
- "Burst/Auto hybrid" fires in burst and switches to full auto if the trigger remains held down.
- Hybrid modes can be programmed to have no transition delay or a 0.2s - 1s delay.
- "Semi/Auto ramping" fires in semi and switches to full auto if the trigger is rapidly tapped.
Hardware Semi-Only Lock
- Can only be enabled/disabled by using a soldering iron to remove/bridge a solder jumper.
- Conforms to semi-only laws that forbid AEGs with readily accessible means of bypassing semi-only.
Realistic RoF Control
- Both fire select positions can be individually configured with a different RoF.
- Every cycle runs at full speed and pauses between each shot to reduce the RoF.
- Provides the most realistic feel and sound compared to any other forms of RoF reduction.
Adjustable Precocking
- Precocking stops the piston in a compressed state so the next shot is near-instantaneous.
- The precocking is fully adjustable and thus also compatible with short-stroked pistons.
- Offers improved realism and trigger response for sniper or low RoF builds.
Adjustable Firing Interval
- After a semi or burst fire, ignores trigger inputs for a certain amount of time. Programmable up to 1s.
- Helps restrict rapid firing in specialized builds, such as limiting a sniper build to firing one shot per second.
- Lower intervals can also help prevent accidental "bump firing" on semi when using a feather trigger.
LiPo / LiFePO4 Monitoring
- Monitors LiPo and LiFePO4 batteries to cutoff power before overdischarge occurs.
- Simply set the number of cells and the controller will use the proper cutoff voltage.
Programmable Digital Fuse
- Sensor-based current monitoring negates the need for a physical fuse.
- Cutoff threshold fully adjustable to help protect low-output batteries from over-current damage.
Gearbox Reliability
- Eliminates the trigger jam normally caused by the cutoff lever stopping at a certain position.
- The cutoff lever mechanism is no longer needed, greatly reducing the chances of semi-fire related issues.
- The anti-reversal latch can also be removed to make gearbox reassembly much easier.
